If a radiant surface element malfunctions (does not heat evenly, does not heat at all, etc.), it may need to be replaced. Replacement elements are specific to the stove model and should be installed according to manufacturer guidelines to ensure safety and proper operation. Check the element itself: Examine the surface of the element for any extreme breaks, or discoloration. If the element appears damaged, it likely needs to be replaced.Check the connection points where the element plugs into the receptacle. Look for signs of corrosion, burning, or loose connections and ensure the element was securely seated in the receptacle.Use a multimeter to test for continuity through the radiant element. This will help determine if the element is conducting electricity properly. Other parts to check: If the element has its own switch, test the switch to ensure it is functioning properly. If the switch does not show continuity when turned on, it may be defective and require replacement.Examine the receptacle where the radiant element plugs in for any signs of damage, burning, or corrosion. Ensure the wires connected to the receptacle are securely attached and not damaged.Use the multimeter to test for continuity through the receptacle terminals to verify proper electrical connection. Watch the video below for more detailed help in locating your model information! The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. A lot of Surface Elements will look the same, but they are 100% Model Specific and have many different specs - even within the same brand, knowing your exact Model and Serial Numbers is very important! Find your Model Specific Elements in our Amazon Storefront today!